Measure the ceiling cut-out
Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.

SMART LED DOWNLIGHT
A recessed spot option with listed stepless dimming. Confirm the matching driver and control method, then test low-output stability in the intended multi-light installation.
PRODUCT DETAILS
PRODUCT DETAIL & BUYER BRIEF
Approve the physical opening, complete driver assembly and tested control arrangement for the project variant.
Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.
Measure the recess, clearance above the ceiling and space needed for the driver and wiring before approving the fixture.
Identify the driver supplied with the quoted variant and check its dimensions, input label, connector and pack inclusion on a complete sample.
Check low-level start, adjustment and any visible flicker with the selected driver and controller.
Check the beam, useful output and visible glare from the intended position with the quoted driver and fixture.
If the project uses groups or a shared controller, operate the intended number of downlights together and record any start-up difference.
Check the actual beam, colour and usable output in the proposed room; a nominal size or wattage does not establish the lighting result.
Record the cut-out, trim, depth, driver, input, control path and unit count together on the sample approval and quote.
OEM & PRIVATE-LABEL OPTIONS
HAVE A PRODUCT IN MIND?
For spot dimming at low output, send the opening, outer diameter, installation depth, power, driver, control method, quantity and project packaging needs.