Shieldaily
Request a Quote

SMART LED DOWNLIGHT

2.5-Inch Wall-Washing Spot Downlight

A small-hill style anti-glare spot option for wall washing and living rooms. Check beam direction and fixture placement as well as the nominal size before approving a ceiling layout.

PRODUCT DETAILS

Lamp format
Downlight
Size option
2.5 in
Installation / use
Wall-Washing
Optic wording
Anti-glare

PRODUCT DETAIL & BUYER BRIEF

What Should Buyers Confirm Before Installing This Downlight?

Approve the physical opening, complete driver assembly and tested control arrangement for the project variant.

01

Measure the ceiling cut-out

Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.

02

Check the available installation depth

Measure the recess, clearance above the ceiling and space needed for the driver and wiring before approving the fixture.

03

Confirm the driver and connector

Identify the driver supplied with the quoted variant and check its dimensions, input label, connector and pack inclusion on a complete sample.

04

Check wall-washing beam placement

Compare the illuminated wall pattern at the intended mounting position and measure the true cut-out.

05

Test the stated lighting control

Operate the switching or dimming method named on the quote with the supplied driver and fixture.

06

Test several units as installed

If the project uses groups or a shared controller, operate the intended number of downlights together and record any start-up difference.

07

Compare beam and light on site

Check the actual beam, colour and usable output in the proposed room; a nominal size or wattage does not establish the lighting result.

08

Approve one project configuration

Record the cut-out, trim, depth, driver, input, control path and unit count together on the sample approval and quote.

HAVE A PRODUCT IN MIND?

Request a Downlight Project Quote

For wall-washing beam placement, send the opening, outer diameter, installation depth, power, driver, control method, quantity and project packaging needs.

Send product requirements