Measure the ceiling cut-out
Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.

SMART LED DOWNLIGHT
A COB spot downlight listing for home and hotel ceilings. Check the actual cut-out, beam and driver arrangement for the 2.5-inch option before selecting it for repeated installation.
PRODUCT DETAILS
PRODUCT DETAIL & BUYER BRIEF
Approve the physical opening, complete driver assembly and tested control arrangement for the project variant.
Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.
Measure the recess, clearance above the ceiling and space needed for the driver and wiring before approving the fixture.
Identify the driver supplied with the quoted variant and check its dimensions, input label, connector and pack inclusion on a complete sample.
Measure cut-out, outer diameter and depth, then compare the COB spot pattern in a sample room.
Operate the switching or dimming method named on the quote with the supplied driver and fixture.
If the project uses groups or a shared controller, operate the intended number of downlights together and record any start-up difference.
Check the actual beam, colour and usable output in the proposed room; a nominal size or wattage does not establish the lighting result.
Record the cut-out, trim, depth, driver, input, control path and unit count together on the sample approval and quote.
OEM & PRIVATE-LABEL OPTIONS
HAVE A PRODUCT IN MIND?
For COB spot beam and ceiling fit, send the opening, outer diameter, installation depth, power, driver, control method, quantity and project packaging needs.