Measure the ceiling cut-out
Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.

Image 1 of 15
SMART LED DOWNLIGHT
A narrow-bezel recessed spot/downlight offer with three-colour switching. Check the visible trim overlap, selected beam and remote switching sequence in the target ceiling.
PRODUCT DETAILS
PRODUCT DETAIL & BUYER BRIEF
Approve the physical opening, complete driver assembly and tested control arrangement for the project variant.
Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.
Measure the recess, clearance above the ceiling and space needed for the driver and wiring before approving the fixture.
Identify the driver supplied with the quoted variant and check its dimensions, input label, connector and pack inclusion on a complete sample.
Measure the trim overlap at the cut-out and operate the three listed light modes with the matched remote.
Check the beam, useful output and visible glare from the intended position with the quoted driver and fixture.
If the project uses groups or a shared controller, operate the intended number of downlights together and record any start-up difference.
Check the actual beam, colour and usable output in the proposed room; a nominal size or wattage does not establish the lighting result.
Record the cut-out, trim, depth, driver, input, control path and unit count together on the sample approval and quote.
OEM & PRIVATE-LABEL OPTIONS
HAVE A PRODUCT IN MIND?
For narrow bezel and three-colour switching, send the opening, outer diameter, installation depth, power, driver, control method, quantity and project packaging needs.