Shieldaily
Request a Quote

SMART LED DOWNLIGHT

Tmall Genie Voice-Control Recessed Spot Downlight

A recessed spot downlight listed with Tmall Genie voice control for bedrooms and living rooms. Verify the beam, ceiling fit and platform setup for the chosen sample.

PRODUCT DETAILS

Lamp format
Downlight
Smart control
Voice-Control
Control ecosystem
Tmall Genie
Installation / use
Recessed

PRODUCT DETAIL & BUYER BRIEF

What Should Buyers Confirm Before Installing This Downlight?

Approve the physical opening, complete driver assembly and tested control arrangement for the project variant.

01

Measure the ceiling cut-out

Compare the actual opening with the model drawing. The outer trim diameter is a separate measurement and cannot substitute for the cut-out.

02

Check the available installation depth

Measure the recess, clearance above the ceiling and space needed for the driver and wiring before approving the fixture.

03

Confirm the driver and connector

Identify the driver supplied with the quoted variant and check its dimensions, input label, connector and pack inclusion on a complete sample.

04

Check bedroom spot beam and voice setup

Check the beam in the planned room and test voice setup with the exact offered driver and control equipment.

05

Compare the installed light pattern

Check the beam, useful output and visible glare from the intended position with the quoted driver and fixture.

06

Test several units as installed

If the project uses groups or a shared controller, operate the intended number of downlights together and record any start-up difference.

07

Compare beam and light on site

Check the actual beam, colour and usable output in the proposed room; a nominal size or wattage does not establish the lighting result.

08

Approve one project configuration

Record the cut-out, trim, depth, driver, input, control path and unit count together on the sample approval and quote.

HAVE A PRODUCT IN MIND?

Request a Downlight Project Quote

For bedroom spot beam and voice setup, send the opening, outer diameter, installation depth, power, driver, control method, quantity and project packaging needs.

Send product requirements